1. The maintenance of cork flooring is easier than other wooden flooring. During use, it is best to avoid bringing sand into the room. Some sand particles are brought in and the floor is not worn. Because the sand is pressed into the elastic layer under the foot, it will be ejected when the footsteps leave. Of course, it should be reminded here that it is not advisable to bring in too much sand, which will still cause flow wear. Therefore, the sand that is brought into the room should be removed in time. Generally, there is no need to equip the vacuum cleaner, and there is no need to worry about the warpage, mildew, etc. phenomenon.
2. If there is wear and tear in some places after three or five years of use, it can be partially compensated, that is, the coating is re-applied at the local part. The method is very simple, and the sand is gently sanded at the worn place to remove the scale on the surface. Then wipe it off with a soft dry cloth, recoat the coating, or apply a polyester film to the area.
3. For the surface painted cork flooring, the maintenance is the same as that of the solid wood floor. Generally, the floor wax can be used once every six months. Cork flooring with a resin-resistant layer on the surface is as simple as a composite floor.
Shrink Sleeve Machine,Semi-Automatic L-Bar Sealer Shrink Packing Machine,Shrink Wrap Machine For Bottle,L Sealer Shrink Packing Machine
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wanfengmachinery.com