Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand mold incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
Use and maintenance of the mold incubator: 1. Adjust the height with the adjustment screw at the bottom of the mold incubator to make the cabinet stable. 2. Plug in the power socket (the power supply should be well grounded), press the power switch, the display is on, at this time the display shows the actual temperature and humidity inside the incubator. 3. Installation of the humidifier: insert the power plug of the humidifier into the power socket on the back of the instrument, and then connect the humidification tube of the instrument to the humidifier, and the connection must be tightly connected. The water in the humidifier water tank must be operated correctly according to the instructions. 4. Temperature adjustment: Press the temperature setting button, the digital display is the set value, rotate the temperature adjustment potentiometer to the desired temperature value, release the button, the digital display is the actual temperature in the cultivation chamber. At this time, if the actual temperature in the incubator is lower than the set temperature, the heating indicator lights, and the heater begins to heat; if the actual temperature in the incubator is higher than the set temperature, the cooling indicator lights, the refrigeration system starts to cool; if the heating indicator When both the cooling indicator and the indicator light are dimmed, the incubator is at a constant temperature. 5. Humidity adjustment: press the humidity setting button, the digital display is the set value, rotate the humidity adjustment potentiometer to the required humidity value, release the button, the digital display is the actual humidity in the mold incubator. When the actual humidity in the cultivation room is smaller than the set humidity, the humidification humidifies the cultivation room and the humidification indicator lights; when the actual humidity in the cultivation room is greater than the set humidity value, the humidifier stops working at this time and the humidification indicator Extinguish. 6. If there is no need for sterilization in the box, the sterilization switch on the panel should be set to the "off" position. 7. After the temperature is set, the temperature control knob cannot be rotated back and forth multiple times, so as to avoid frequent compressor startup, causing the compressor to overload and affect the life of the compressor. 8. Two sets of fuse boxes are installed on the back of the machine, 2A is the cooling and heating load fuse box, and 8A is the control power fuse box. If the machine fails, such as temperature control failure, no heating or cooling, the power must be cut off and checked Check if the fuse is intact. 9. Care must be taken when handling, the angle with the horizontal plane should not be less than 45 Â°. 10. When the use temperature is low, the water accumulated in the water tray at the bottom of the tank should be drained regularly. 11. If the humidifier is faulty, please follow the warranty points on the humidifier instruction manual and repair it nearby. 12. When the humidity sensor is in a high humidity state for a long time, condensation will form, that is, the humidity display value will remain high. If an accurate humidity display value is required, the door of the incubator box should be opened after leaving the humidity sensor at room temperature Medium, after natural drying, you can continue to use. 13. In order to maintain the beauty of the equipment, it is not allowed to wipe the surface with acid or alkali and other corrosive materials. The box can be wiped dry regularly with a dry cloth. 14. If the humidity is not used for a long time, please pour out the water in the box. 15. When the instrument is out of service, the power plug should be unplugged.
Shanghai Haozhuang Instrument Co., Ltd. is a technologically innovative high-tech enterprise based in Shanghai and radiating the whole country. The company has first-class technical personnel and a good team of technicians, with advanced technology and strong development strength. Since the establishment of the company, the products and The service is recognized by customers and has a good reputation. The company adheres to the business philosophy of "integrity. Professionalism. Innovation. Growth" to provide customers with elaborate services. The company's main business and production scope include: testing equipment, laboratory equipment, cleaning equipment, Environmental protection equipment and undertake the design and customization of non-standard products and provide related technical services. First-class technology, first-class service.
There are many different styles of Brush Sets in this category. Some styles are normal, some are
special, and some are unique designed. Each Makeup Brush Set comes with both Face Brushes and Eye Brushes. In this category, you can find all the cosmetics brushes that you may need for applying powder, blush, contour, highlighting, foundation, eye shadow, concealer, eyeliner, eyebrow, and lip products.
All the Makeup Brushes are made with synthetic bristles which is cruelty-free, durable and easy to clean. Most of the brushes are made with aluminum ferrules which won't discolor or rust. A few of them are made with electroplated plastic ferrules which looks shinier. Handles of each brush are reasonably designed to fit your hand to hold.
Are you looking for a brush set? Just click into this category to have a look.
Professional Makeup Brushes,Brush Sets,Flawless Brush Collection,Makeup Brush Set
SHENZHEN MERRYNICE COSMETICS CO., LTD / MERRYNICE COSMETICS USA GROUP , https://www.merrynice.com